Before large-scale construction of rock wool insulation boards, the same materials, construction methods, and processes should be used according to regulations to make model walls on site. Construction can only be carried out after confirmation. Relevant aspects.

When using rock wool insulation boards for construction, operators should wear good labor protection equipment, provide occupational health protection, and pay attention to construction safety.

The materials that require inspection of the external insulation system of the rock wool insulation board should be sent to a qualified testing agency for testing, and only after testing can they pass.

The pasting of rock wool insulation board should be in the form of strip or point pasting, and the bonding area should not be less than 50%. After completing the rock wool board with adhesive, the lower end of the insulation board should be pasted onto the foundation layer. The rock wool board should be placed horizontally from the bottom to the top, and the side should be fixed to the edge of the board. Shall not exceed 2mm. If the joint width is 2mm, insulation material should be used for filling, adjacent panels should be flush, and the height difference between panels should not exceed 1.5mm.

All through-wall pipelines and components passing through rock wool insulation boards are filled with the same material at the outlet, and then sealed and waterproof.

If it is found that the veneer layer falls off during the construction process, it should be fixed in a timely manner by bonding or fixing, and the construction of the exterior wall surface layer should be carried out in a timely manner.

Rock wool board is a type of insulation material with insulation function, commonly used in external wall insulation systems. The rock wool exterior wall insulation system established with rock wool boards has excellent insulation, shock resistance, fire resistance, and durability. In addition to its functions, rock wool boards are also fixed to the wall through a useful fixing method and have excellent wind load resistance.

1. Pay attention to rain, moisture, and moisture prevention.

When the temperature exceeds a certain temperature, it is necessary to add suitable external insulation materials for insulation.

3. When the insulation target is placed at 90 degrees and a certain height, the insulation layer of the rock wool board must have positioning pins or support rings, and the distance should not be greater than 3 meters to prevent the insulation material from sliding down when feeling it.

4. Equipment that requires insulation, insulation nails, and pipelines are suitable for corrosion protection and can receive appropriate coatings. There should be no other leakage. This can achieve good results.